A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002     

注浆法在已建油罐地基加固中的应用

在一定的压力作用下,将水泥浆注入松散的地基土中,浆液凝固后将松散的土粒固结在一起,对地基进行加固。这种方法具有省时、省工、省费用、使用简单方便等优点。特别是对已建油罐地基的处理更有其独到之处。由于钻孔可在任意角度下进行,因此可对罐基础任何区域进行加固并达到较好的效果。文章对钻孔布置、钻孔、注浆花管布置、压力灌浆、充水预压等几项关键技术进行了较详细的论述。     

《关于加强嫩江松花江近期防洪建设的若干意见》论证概要

水利部《关于加强嫩江松花江近期防洪建设的若干意见》近期已由国务院办公厅批转有关省、自治区和国务院有关部门执行。本文简单介绍了《关于加强嫩江松花江近期防洪建设的若干意见》编制过程中对设计洪水、防洪标准、工程布局和非工程措施的论证情况和主要结论。     

中国的主要水问题及水文学的机遇

从水资源开发利用与保护、水旱灾害防治等方面论述中国当前存在的主要水问题：水危机和水浪费同时存在、水污染日趋严重、防洪减灾任重道远、生态环境破坏严重、全球气候变暖产生不利影响；进而论述水文学研究面临的新课题：水文现象的不确定性、人类活动对水文的影响、水位频率计算、水资源开发利用的最佳效应、水资源供需分析、农业节水灌溉机理及水旱灾害的防治，并指出必须加强对这些新课题的研究     

九江市1998年抗洪回顾与反思

通过九江市１９９８年汛情特点的分析，及抗击这次超历史洪水各项措施的总结，进行了深刻的反思     

沼气汽车加气站的探讨

分析了适合于汽车加气用沼气的品质，就沼气汽车加气站的流程、设备选型等进行了论述。     

采空区治理工程中注浆管的起拔及重复利用

以某采空区治理工程为例，介绍了采用正反丝连接注浆管的新方法，成功地解决了注浆管的起拔及重复利用问题，并对新法与不拔管及常规拔管方法的经济性进行了分析比较。     

Effect of water inlet velocity on thermal stratification in a mantled hot water storage tank

Thermal stratification in a mantled hot water storage tank is analysed numerically for different water inlet velocities. The aim is to obtain higher thermal stratification and supply hot water for usage as long as possible. Twelve different water inlet velocities to the hot water storage tank are considered. The numerical method is validated by comparing its results against experimental and numerical results from the literature. It turned out that the results obtained from the numerical analysis have shown very good agreements with the results from previous works. As a result, the water temperature in the tank increases with the increase of the water inlet velocities to the mantle but this increment is not proportional. After a period of operation of 7.2 h, which corresponds to the average sunshine duration in Turkey, temperature increments of 6.5 and 35 K have been estimated for the hot water inlet velocities of 0.01 and 0.3 m s^?1, respectively, at a radial distance of 0.1 m and a height of 1 m inside the storage tank. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。